Thermostatic controllers Optimaä TX150 / TXF200
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use.
The two advanced heating circulators feature a modern, icon driven programming interface and full colour display. Cooling/heating range: -15 °C to 150 °C* (TX150) and -15 °C to 200 °C* (TXF200).
*For using at or below room temperature you need additional flow coolers C1G (9.920 765) or C2G (9.920 766).

Features:
Visual and audible alarm, timer, 5 point recalibration, adjustable over temperature cut-out, pump, external probe, progammable, relay, menu system, program storage, USB/RS-232 port

T Clamp: For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.

Models with clamps available on request.
Specifications
Temperature range with stainless steel tank
TX150:
TXF200: -15°C to 150°C*
-15°C to 200°C*
Stability / Uniformity (DIN 12876) at 70°C: ±0.01°C / ±0.05°C
Setting resolution: 0.1°C (0.01°C with Labwise)
Display: QVGA TFT
Timer: 1 min to 99 hrs 59 mins
No. of pre-set temperatures: 3
Recalibration points: 5
Heating power (230V):
Power supply (230V / 50-60Hz): 1.9kW
2.0kW
Interface: USB and RS232
Pump max. pressure
TX150: 310 mbar
TXF200: 530 mbar
Flow rate max.
TX150:
TXF200: 18l/min
22l/min (adjustable)