CO2 Incubators ICOmed
The CO2 incubator ICOmed is the perfect solution: Thanks to the battery-buffered ControlCOCKPIT, the operating display, logging and CO2 control remain fully functional even when there is a power failure. All parameters are logged in accordance with the FDA and, when individually adjusted ranges for CO2, O2, temperature and humidity are exceeded, notifications can be sent to a mobile phone in addition to an alarm. With its rounded corners, the interior is easy to clean and can be sterilised for 60 minutes at 180 °C (including all sensors). The active humidity control offers optimal protection for cell and tissue cultures. It minimizes evaporation in the interior and ensures short recovery times. Every Memmert CO2 incubator ICOmed is a medical device of class IIa according to MDD 93/42/EEC until 26 May 2024 according to the transitional provisions by the (EU) 2017/745 article 120 (2).
-fully insulated stainless steel door and heated inner glass door

Model variant TwinDISPLAY: ControlCOCKPIT with two colour displays
You can find a detailed description of the ''TwinDISPLAY'' model at www.memmert.com
Specifications
Working temperature range: at least 5 above ambient up to +50°C
(standard sterilisation programme: 60 minutes at 180°C)
Setting temperature range: +18 °C up to +50 °C
Setting accuracy temperature: 0,1°C
Humidity limitation thanks to a Peltier element: when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/-2,5 %
Setting range active humidity control: 40 to 97 % rh and rh-Off
Setting accuracy humidity: 0,5 % rh
CO2-concentration: 0 to 20 %
O2-concentration: 1 to 20 %
Setting accuracy CO2: 0,1 %
Setting accuracy O2: 0,1 %
Power supply: 230 V, 50/60 Hz